![Spectric Single Colour LED Strip Lights (60 x 3528 SMD, 4.8W, 400 Lumens) Spectric Single Colour LED Strip Lights (60 x 3528 SMD, 4.8W, 400 Lumens)](https://cdn11.bigcommerce.com/s-d9mdgad7be/images/stencil/640x640/products/19397/42612/ms603528_1__65554.1720449632.jpg?c=1)
![Spectric Single Colour LED Strip Lights (60 x 3528 SMD, 4.8W, 400 Lumens) Spectric Single Colour LED Strip Lights (60 x 3528 SMD, 4.8W, 400 Lumens)](https://cdn11.bigcommerce.com/s-d9mdgad7be/images/stencil/160w/products/19397/42619/back-min_9__96138.1720449634.jpg?c=1)
Spectric Single Colour LED Strip Lights (60 x 3528 SMD, 4.8W, 400 Lumens)
(14)
Download the spec sheet for the Spectric Single Colour LED Strip Lights (120 x 3528 SMD, 9.6W, 800 lumens) here.
Make use of the Mirrorstone 9.6w/m single colour LED strip light wherever you require illumination. It is very effective for use with task lighting, main lighting within smaller rooms such as en suites and illumination of smaller signs.
Coming with a strong 3M self-adhesive backing, these strips will stick down onto almost any surface. However, due to the wide range of surfaces that the LED Strip Lights are stuck to, we unfortunately cannot guarantee the adhesive on all surfaces. Also, please note that the IP67 LED Tape does not come with the 3M Adhesive. Alongside its use of being adhesive, these strips can be cut down to 25mm making it our most accurate strip available in terms of achieving set lengths.
Did you know that all of our LED Tape is dimmable? Simply use alongside a dimmable driver to alter the brightness!
Please note that all IP67 and IP68 tape comes in lengths of up to 5m max, and will not fit in any of our aluminium profiles.
IP65 tape comes in maximum lengths of up to 25m, and will be soldered tape to tape every 5m for any lengths over 5m. Although 25m lengths are available in this way, there is no guarantee that it can be ran continuously due to power drop. Please get in touch with us if you require further information about this.
IP20 tape may or may not come soldered tape to tape, as this depends on how it arrives to us from our suppliers.Find further information on Strip Lights on our FAQs page.
These strips also are included in the frequent discount codes that are ran on the website and save up to 20% on your order.
The brand new Spectric line of LED strip lights will massively improve your lighting experience. These strip lights bring more vivid lighting, with a greater lumens to energy expenditure ratio than ever before. The life expectancy has been increased, with a whopping 50,000 hours of usage delivering a versatile light every single time.
LED strip lights are a very versatile product and have a wide range of uses, to fully amplify this, they come in a range waterproofing options. All available IP ratings are detailed in the table below:
IP Rating | Usage |
IP20 | Our lowest IP rated tape offers no protection against water. IP20 is used in almost all internal installations from under cabinet lighting to backlighting. |
IP65 | Coming with a silicone cover on the base strip, IP65 LED strips can withstand jets of water and splashes. IP65 is heavily used in bathrooms for general lighting and effect lighting such as going round a mirror. |
IP67 | IP67 rated Strip Lights are heavily waterproofed and suitable for use outdoors. IP67 is only ever used externally and mainly for decorative garden lighting. |
IP68/IP68 Nano | The strongest strip for waterproofing, IP68 and IP68 Nano can be submerged up to 10 metres and still work as efficiently. Swimming pools and ponds are the applications where IP68 rated Strip Lights are at their best use. |
The process of ordering your custom length strips is simple - LED Tape is charged by the metre, and when filling out the quantity box to specify your lengths, please round up to the nearest metre.
IP ratings are very important on the installations, another factor for consideration is the colour the strip lights come in. The colour can greatly influence the mood of a room and is an important choice. Our single colour strips come in a host of colours including red, blue and green but mainly the two colours chosen are warm white (3000K) or cool white (6000K).
For strip lights that are installed in living areas such as a living rooms or bedrooms the colour temperature most bought and most recommended is warm white. This is highly recommended for areas where you will be relaxing more, as well as rooms that are more traditionally styled.
Like warm white, cool white is useable in a range of places like the bathroom and kitchen. Cool white is also a very good choice for use in external feature lighting as well due to bright white colour. Also, rooms that have a more modern style to them tend suit cool white better.
Here at Wholesale LED Lights we offer a service where we can cut your LED strip lights to sizes that you request and are the only UK LED retailer to do so. You can have your strip lights cut down, ready for installation as soon as it turns up. On top of the custom length strips, we can also solder lengths of cable on to the end of them to get flexibility on installation.
This service is only available to customers who have purchased such products from Wholesale LED Lights.
Although this service is available it is not required, if you'd rather have one long length that you'd like to make up to your lengths on site then we can provide one length that you can adjust to your size.
Like the 14.4w/m single colour LED strip light, this strip light can run up to 7.5m in one uninterrupted length.
All LED Tape is priced per metre. If you purchase any amount of LED strip lights then we will send it out as one full, uninterrupted length e.g. 1 x 3m rather than 3 x 1m.
Being low voltage, a 12 volt power supply is needed for the strip lights to illuminate. We offer a wide range of power supplies for LED Strip Lights such as dimmable LED drivers and AC/DC power adapters.
There is also a wide range of powers available to accommodate for longer lengths of strips. The list below allows you to find the power supply you'll need dependant on the lengths:
■ 1 Metre - 9.6 Watts;
■ 3 Metres - 28.8 Watts;
■ 5 Metres - 48 Watts;
■ 10 Metres - 96 Watts;
■ 20 Metres - 192 Watts.
When installing power supplies we always advise a power supply that is 10% higher in wattage than the total draw of the tape. This is so they run as efficiently as possible and their lifespan is maximised.
Our full range of LED strip lights come with a life expectancy of 50,000 hours which means they'll last over a decade. Not only is this lifespan extremely long, it can also be extended even further depending on some conditions of the installation.
Favourable Conditions | Unfavourable Conditions |
The air around the LED Strips is at a cool temperature. | There is warm air around the strips and the room. |
Being mounted on a heat that dissipates heat efficiently such as aluminium. | Surfaces such as wood are not advised due to their poor ability to dissipate heat. |
Only have the strips IP Rated when absolutely necessary. | Using IP Ratings when not necessary. |
If the strips can be mounted in all of these favourable conditions, then you can have up to 50% extra lifespan making the strips lasting up to 75,000 hours.
To help extended this lifespan, we also sell profiles for LED strip lights to help dissipate the heat a lot more effectively than almost all surfaces which will help lengthen the lifespan. Not only do these profiles have the ability to extend the life of the strips, the profiles can also make the strip more aesthetically pleasing with the choice of a clear or frosted diffuser.
Please note that the previously mentioned IP65 Rated LED Strips are not covered by any warranty if they are fitted internally and NOT mounted on aluminium profiles. If you do install IP65 Rated strips without the Aluminium Profiles and they fail within the first 2 years of use then replacements will be charged at 50% when bought alongside aluminium profiles which are charged at full price.
The full range of Mirrorstone products are covered by a 2 year warranty as standard. This warranty is then extendable to a 5 year warranty on all of the Mirrorstone LED spotlights, LED light bulbs and LED tapes. This warranty is however, only available for orders that are still within 90 days of their purchase date.
If you aren't exactly sure on how to install or cut LED strip lights then have a look at our YouTube channel for simple guides on how cut and stick LED strip lights.
If you have queries about the product or have any trade enquiries the please feel free to get in contact with us by e-mail at cs@wled.co.uk or call us on 0116 321 4120.
Call us on 0116 321 4120, Mon - Fri: 8:30am - 5pm
For sales and ordering, email sales@wled.co.ukFor troubleshooting, returns or any other product queries, email cs@wled.co.uk.
Contact Us