Spectric Single Colour Zig-Zag LED Strip Lights (60 x 2835 SMD, 10W, 800-1000 Lumens)
Download the spec sheet for the Single Colour High Power Non-Dotting LED Strip Lights (240 x 2835 SMD, 20W, 2500 Lumens) here.
The Single Colour High Power Non-Dotting LED Strip Lights (240 x 2835 SMD, 20W, 2500 Lumens) from Mirrorstone is a game changer in the world of strip lights.
Its non-dotting appearance offers a seamless finish which doesn’t show the individual LED chips. Each metre of tape contains 240 LED chips which have the capacity to beam out 2500 lumens of light. Don’t forget that this tape is fully dimmable too, you will just need to purchase an accompanying power supply.
The wattage per metre of this tape is dependent on the length you are running. For example, smaller lengths, such as 1m or 2m can consume up to 30w per metre, with the consumption lowering as you run longer lengths.
As a result, we advise leaving a 25% leeway on your LED Driver, rather than the standard 10%.
Available in cool white (6000K), daylight (4000K), warm white (3000K) or in red, green or blue; you can customise your light to your room. You can even have your tape IP67 rated, meaning it will be suitable for use in all areas from under your kitchen cabinets to around a pond outdoors.
This single colour strip will produce light with a CRI rating of 90, meaning it will proudce light that really closely resembles natural daylight, creating a more authentic look. This makes it ideal for studios, galleries and craft rooms, where colour accuracy is needed.
Take control of your lighting by choosing one of our single colour LED controllers to pair with your tape. By controlling your light, you will further reduce your lighting bills and further increase the longevity of the tape. LEDs naturally have an extensive lifespan, seeing them last for up to 50,000 hours.
These strips are also included in our promotional deals so you could save up to 20% off of your order.
Here at WLED, we offer an exclusive cutting and soldering service on all of our strip lights. Our lighting technicians will cut and solder your tape to the specific lengths that you need. The tape itself can be cut every 2.5cm making it easier for you to get the exact length you need.
If you have a project in mind, feel free to contact our strip lighting team who will be able to organise a custom quote for you.
Please be informed that all custom length can take up to 7-days extra before being shipped out.
Order now for free delivery on orders of £40 and to be covered for up to 5-years with our comprehensive warranty. All strip lights come with a 2-year guarantee as standard, which can be further extended to 5-years at your discretion.
Please note that all IP67 and IP68 tape comes in lengths of up to 5m max, and will not fit in any of our aluminium profiles.
IP65 tape comes in maximum lengths of up to 25m, and will be soldered tape to tape every 5m for any lengths over 5m. Although 25m lengths are available in this way, there is no guarantee that it can be ran continuously due to power drop. Please get in touch with us if you require further information about this.
IP20 tape may or may not come soldered tape to tape, as this depends on how it arrives to us from our suppliers.
We have a wide variety of LED Strip Lights to choose from with multiple colour and IP rated options. You can also customise your order with a driver of your choice, as well as a remote or Wi-Fi controls if you so please.
To add a layer of protection to your tape, don’t forget to add a profile to keep your tape in place. As this tape has a width of just 10mm, it will fit in the majority of our profiles except from the slim varieties. A great option to pair with this tape is the SlimPro 1m Classic Aluminium Profile/Extrusion. As with all of our aluminium profiles, they will come with all necessary mounting brackets and end caps to surface mount them onto the vast majority of surfaces.
To make your tape dimmable, be sure to select a dimmable driver to accompany your order. Our recommendation is the 100W DALI Dimmable Driver 12v/24v. This will give you ultimate control over your lighting and is also fully RoHS & CE certified meaning it is perfectly safe for use.
To complete the job, you could make your set up Wi-Fi friendly by purchasing a Wi-Fi receiver along with an EasiLight Single/Dual Colour 4 Zone Remote. This will give you freedom over your strip lights with the ability to control your strip lights using an app or remote.
If you’re a VAT registered Tradesperson then we recommend creating a wholesale trade account with us. You could make huge savings of up to 50% off of RRP and you will receive your goods via priority dispatch.
We’re here to help, so please don’t hesitate to contact us if you have any questions regarding this product. You can reach us over the phone on 0116 321 4120, or you can send us an email to cs@wled.co.uk.
You can also speak to an advisor directly via our website by clicking on our Live Chat Service at the bottom of the page.
Get social and join us on Facebook, Twitter and Instagram to stay updated with us and our offers!
Call us on 0116 321 4120, Mon - Fri: 8:30am - 5pm
For sales and ordering, email sales@wled.co.ukFor troubleshooting, returns or any other product queries, email cs@wled.co.uk.
Contact Us