IMPORTANT NOTICE: This driver is only to be installed by a qualified electrician.
It also must be installed inside a plastic junction box.
If you are unsure about the installation of this driver, please consult a qualified electrician for professional guidance and advice.
Download the spec sheet for the X-Power 240W LED Driver here.
Illuminate any low voltage LEDs you have with the 240W LED Driver produced by Mirrorstone. Featuring an enclosed casing, each unit comes with a fan incorporated into it to help keep a sustainable heat level.
Each unit is CE & RoHS certified meaning it can be installed in most areas around your house without issue. Due to its waterproof rating of IP20, it does not however, have the protection required for a bathroom installation.
The powerful X-Power range of LED drivers delivers some excellent transformation, with the ultimate efficiency. The fan has been upgraded, for quieter running and increased lifespans. The size has also been reduced, leaving a sleeker, quieter, cooler driver to supply your lower-voltage lighting.
As you can have the 240W LED Driver in either a 12V or 24V output, the range of what can be ran from it is huge. All of the LED strips we have available are compatible with it in one way or another.
With such a range of strips being available, there is not a set length that can be ran from the driver so below is a list of the lengths that can be ran from the unit:
These aren't the only products that you can use LED drivers for though. There's also controllers for them all such as RGB, low loltage dimmers, dual colour, DMX decoders and even Pixel controllers.
You can also run low voltage LED spotlights and LED light bulbs from the 240W driver. If you really wanted to, you could run 60 individual MR16s or a rather excessive 240 separate G4s from one driver!
Despite all of these monumental figures, this driver is not dimmable. This means any dimmer switch you install in the same circuit will damage the driver and void any warranty.
Alongside this driver, there is a huge selection of LED power supplies, such as ones similar to this as well as AC/DC power adapters, waterproof drivers and dimmable drivers. There are also drivers specific for dimming styles such as 1-10v and DALI compatible drivers.
Each LED driver that is manufactured by Mirrorstone comes with a 1 year replacement warranty.
Not only do you get this cover for 2 years, but each order comes with a 14 day home trial. This allows you to test your order and make sure you have what is right for you. If anything is wrong, just let us know and we can help arrange a return.
On top of this you should also know that orders over £40 ship free and that you can also save of up to 20% off selected items by making use of the special discount codes that we offer from time to time.
If you'd like advice on our LED power supplies or even if you'd like a hand planning your LED strip light set up just call us on 0116 321 4120 or send an e-mail to cs@wled.co.uk and we can answer any questions you may have.
IMPORTANT NOTICE: This driver is only to be installed by a qualified electrician.
It also must be installed inside a plastic junction box.
If you are unsure about the installation of this driver, please consult a qualified electrician for professional guidance and advice.
Download the spec sheet for the X-Power 240W LED Driver here.
Illuminate any low voltage LEDs you have with the 240W LED Driver produced by Mirrorstone. Featuring an enclosed casing, each unit comes with a fan incorporated into it to help keep a sustainable heat level.
Each unit is CE & RoHS certified meaning it can be installed in most areas around your house without issue. Due to its waterproof rating of IP20, it does not however, have the protection required for a bathroom installation.
The powerful X-Power range of LED drivers delivers some excellent transformation, with the ultimate efficiency. The fan has been upgraded, for quieter running and increased lifespans. The size has also been reduced, leaving a sleeker, quieter, cooler driver to supply your lower-voltage lighting.
As you can have the 240W LED Driver in either a 12V or 24V output, the range of what can be ran from it is huge. All of the LED strips we have available are compatible with it in one way or another.
With such a range of strips being available, there is not a set length that can be ran from the driver so below is a list of the lengths that can be ran from the unit:
These aren't the only products that you can use LED drivers for though. There's also controllers for them all such as RGB, low loltage dimmers, dual colour, DMX decoders and even Pixel controllers.
You can also run low voltage LED spotlights and LED light bulbs from the 240W driver. If you really wanted to, you could run 60 individual MR16s or a rather excessive 240 separate G4s from one driver!
Despite all of these monumental figures, this driver is not dimmable. This means any dimmer switch you install in the same circuit will damage the driver and void any warranty.
Alongside this driver, there is a huge selection of LED power supplies, such as ones similar to this as well as AC/DC power adapters, waterproof drivers and dimmable drivers. There are also drivers specific for dimming styles such as 1-10v and DALI compatible drivers.
Each LED driver that is manufactured by Mirrorstone comes with a 1 year replacement warranty.
Not only do you get this cover for 2 years, but each order comes with a 14 day home trial. This allows you to test your order and make sure you have what is right for you. If anything is wrong, just let us know and we can help arrange a return.
On top of this you should also know that orders over £40 ship free and that you can also save of up to 20% off selected items by making use of the special discount codes that we offer from time to time.
If you'd like advice on our LED power supplies or even if you'd like a hand planning your LED strip light set up just call us on 0116 321 4120 or send an e-mail to cs@wled.co.uk and we can answer any questions you may have.
(5)
Call us on 0116 321 4120, Mon - Fri: 8:30am - 5pm
For sales and ordering, email sales@wled.co.ukFor troubleshooting, returns or any other product queries, email cs@wled.co.uk.
Contact Us
