UltraSpot+ Ignis Plus Fire Rated Downlight MR16 Tilt White

No reviews yet Write a Review
SKU: MS-RA-7IGP/TW
Retail Price £9.49
Hurry up! Current stock:
5 customers are viewing this product

Please note that when purchasing this MR16 Downlight, you will need an additional driver of adequate load for your bulb that can step mains 240V down to 12V.

This downlight comes with a GU10 lamp holder as standard, and is supplied with an MR16 lamp holder separately, allowing you to use MR16 bulbs.

The Mirrorstone Fire Rated MR16 Tilt Downlight is a safe and simple option for lighting your kitchen or bathroom at home.

The MR16 base makes it compatible with all our MR16 spotlights – with their low 12V DC voltage helping with safety in areas where there might be moisture.

It comes in a neat, diecast white finish that wouldn’t look out of place in any home. The tilt functionality gives you some freedom with how you want your light to be distributed too.

Using our discount and promotional codes page, you could get up to 20% off selected items, so take advantage now before our offers disappear.

Introducing UltraSpot

The new and improved UltraSpot range delivers incredible-looking downlights with a difference. They include updated intumescent materials to lengthen the amount of time it takes for fire to spread.  They have a tighter design with better heat sink technology in order to increase energy-efficiency.

The Real Safety Benefit

Whilst MR16 bulbs provide some degree of additional safety because of their low voltage, the real security from this product comes from the fact that it’s fire rated.

The ceiling in any given room normally acts as a protective barrier that shields the spread of fire between floors.

Cutting holes in the ceiling so you can install your LED downlights compromise this barrier. Even after the downlight has been fitted, there will still be tiny gaps between the hole and the edge of the light.

These gaps can let heat and air pass through, which won’t do much to stop fires spreading.

Fire rated downlights though are made from intumescent material – they swell up when exposed to heat.

This closes the gaps in the ceiling and restores the protection your ceiling would otherwise give you. This will last up to 90 minutes, which is more than enough time for you to evacuate your property.

Although fire rated products cost marginally more than standard ones, we feel the added price is justified by the safety benefits.

The ways you can save money mentioned above can also help you offset some of this cost too.

All You Need Is...

So our downlight gives you safety in abundance, ease of use and a subtle, classy finish. What do you need to bring?

Just a 90mm cutting hole, your own bulbs and a compatible driver.

The cutting hole is simple, but the other 2 might need a bit of thought. Don’t worry, we’re here to help.

As far as bulbs go, you could do a lot worse than our 6W MR16 LED Spotlight 27 SMD. It offers fantastic all round performance, with 6W power consumption and 450 lumens of light.

A lifespan of 50,000 hours and beam angle of 120o gives it long term, versatile use.

The really convenient thing about this particular MR16 spotlight though, is that you can optionally have a driver bundled with it, eliminating the need to buy one separately. This helps streamline the process of setting up your downlight.

If you still need a driver though, our 6W LED Driver would be a great option. It installs seamlessly between your mains and your spotlight, and even comes with an IP44 rating – perfect for use in the bathroom or kitchen.

Please make sure you check out our wider range of fire rated MR16 downlights, to ensure you’re getting the best product.

Solving Any Problems

Our 14 day home trial period allows you to get a full refund or exchange if you decide that you no longer want your LED downlight anymore.

Beyond that, Mirrorstone’s 12 month manufacturer warranty gives you added cover in the long term.

Please get in touch with us if you have any further questions regarding this item, MR16 bulbs, wholesale orders or anything else – email us at cs@wled.co.uk or give us a ring on 0116 321 4120.

Base: MR16
Brand: Mirrorstone
Cutting Hole (mm): 90mm
Diameter (mm): 100mm
Input Voltage: 12V
IP Rating: IP20
Recess Depth: 95mm
Finish: Premium White
Warranty: 1 Year

This product hasn't received any reviews yet. Be the first to review this product!

UltraSpot+ Ignis Plus Fire Rated Downlight MR16 Tilt White

UltraSpot+ Ignis Plus Fire Rated Downlight MR16 Tilt White

Retail Price £9.49

Description

Please note that when purchasing this MR16 Downlight, you will need an additional driver of adequate load for your bulb that can step mains 240V down to 12V.

This downlight comes with a GU10 lamp holder as standard, and is supplied with an MR16 lamp holder separately, allowing you to use MR16 bulbs.

The Mirrorstone Fire Rated MR16 Tilt Downlight is a safe and simple option for lighting your kitchen or bathroom at home.

The MR16 base makes it compatible with all our MR16 spotlights – with their low 12V DC voltage helping with safety in areas where there might be moisture.

It comes in a neat, diecast white finish that wouldn’t look out of place in any home. The tilt functionality gives you some freedom with how you want your light to be distributed too.

Using our discount and promotional codes page, you could get up to 20% off selected items, so take advantage now before our offers disappear.

Introducing UltraSpot

The new and improved UltraSpot range delivers incredible-looking downlights with a difference. They include updated intumescent materials to lengthen the amount of time it takes for fire to spread.  They have a tighter design with better heat sink technology in order to increase energy-efficiency.

The Real Safety Benefit

Whilst MR16 bulbs provide some degree of additional safety because of their low voltage, the real security from this product comes from the fact that it’s fire rated.

The ceiling in any given room normally acts as a protective barrier that shields the spread of fire between floors.

Cutting holes in the ceiling so you can install your LED downlights compromise this barrier. Even after the downlight has been fitted, there will still be tiny gaps between the hole and the edge of the light.

These gaps can let heat and air pass through, which won’t do much to stop fires spreading.

Fire rated downlights though are made from intumescent material – they swell up when exposed to heat.

This closes the gaps in the ceiling and restores the protection your ceiling would otherwise give you. This will last up to 90 minutes, which is more than enough time for you to evacuate your property.

Although fire rated products cost marginally more than standard ones, we feel the added price is justified by the safety benefits.

The ways you can save money mentioned above can also help you offset some of this cost too.

All You Need Is...

So our downlight gives you safety in abundance, ease of use and a subtle, classy finish. What do you need to bring?

Just a 90mm cutting hole, your own bulbs and a compatible driver.

The cutting hole is simple, but the other 2 might need a bit of thought. Don’t worry, we’re here to help.

As far as bulbs go, you could do a lot worse than our 6W MR16 LED Spotlight 27 SMD. It offers fantastic all round performance, with 6W power consumption and 450 lumens of light.

A lifespan of 50,000 hours and beam angle of 120o gives it long term, versatile use.

The really convenient thing about this particular MR16 spotlight though, is that you can optionally have a driver bundled with it, eliminating the need to buy one separately. This helps streamline the process of setting up your downlight.

If you still need a driver though, our 6W LED Driver would be a great option. It installs seamlessly between your mains and your spotlight, and even comes with an IP44 rating – perfect for use in the bathroom or kitchen.

Please make sure you check out our wider range of fire rated MR16 downlights, to ensure you’re getting the best product.

Solving Any Problems

Our 14 day home trial period allows you to get a full refund or exchange if you decide that you no longer want your LED downlight anymore.

Beyond that, Mirrorstone’s 12 month manufacturer warranty gives you added cover in the long term.

Please get in touch with us if you have any further questions regarding this item, MR16 bulbs, wholesale orders or anything else – email us at cs@wled.co.uk or give us a ring on 0116 321 4120.

Customers Also Viewed