Retail Price
£173.21
The DIMI Ultra 200W Dimmable Constant Voltage Driver is built to ensure your low voltage LEDs can be used safely. This driver will take an input voltage of 200-240VAC from your mains electricity and translate it into a 12V or 24V DC (depending on which voltage option you pick on purchase).
Without this, you will cause your LED tape to blow almost immediately, rendering it useless and potentially dangerous.
This driver is designed for use with LED strip lights. With a maximum load of 200W, this driver can easily be used to power long lengths of powerful LED tape.
When used with compatible switches and remotes, this driver can also smoothly dim your light displays, letting you select your perfect ambience for your room.
A built-in active PFC function ensures your driver is as efficient as possible. It even features short circuit, overload, over temperature and over current protections for extra peace of mind.
The IP66 rating means his driver can be used safely with outdoor displays, as it’s protected from dust as well as low pressure water jets from all directions.
There are absolutely loads of reasons to make sure you’ve switched over to LEDs throughout your home, even if you need to purchase drivers to make sure they work. We’ve picked out three of the best reasons to swap.
Firstly, LEDs use significantly less energy compared to their counterparts (90% less compared to an incandescent bulb). That means they cost very little to run, but it also massively reduces their environmental impact.
Secondly, LEDs are a lot more flexible compared to older bulbs. This is why you can get stunning LED strip lights. LED chips can be compact, and can produce light in a range of colours and brightness levels with a minimum of fuss.
Thirdly, LEDs last a really long time, with most of our strip tapes rated for 50,000 hours. That’s nearly two decades of use in the right conditions.
If 200W is a bit excessive for your needs, the DIMI range has numerous other maximum wattage options to choose from, including the much smaller DIMI Ultra 30W Dimmable Constant Voltage Driver. You could also choose the very powerful DIMI Ultra 360W Dimmable Constant Voltage Driver.
If instead you want a bit more customisation and control, then our EasiLight 150W RGB + CCT Dimming LED Driver (Wi-Fi + 2.4G) is a popular choice, as it ensures your displays can be controlled through your Wi-Fi signal.
If you decide for any reason that you would like to return your LED driver, you should know that you are fully entitled to a refund or exchange within 14 days of purchase, protecting your rights as a consumer.
You also have a 3-year warranty, covering you for any problems you might run into further down the line.
For any other enquiries you might have about this driver, whether that’s installation advice, trade prices or other product please feel free to get in touch. You can send us an email at cs@wled.co.uk, or you can ring us on 0116 321 4120.
The DIMI Ultra 200W Dimmable Constant Voltage Driver is built to ensure your low voltage LEDs can be used safely. This driver will take an input voltage of 200-240VAC from your mains electricity and translate it into a 12V or 24V DC (depending on which voltage option you pick on purchase).
Without this, you will cause your LED tape to blow almost immediately, rendering it useless and potentially dangerous.
This driver is designed for use with LED strip lights. With a maximum load of 200W, this driver can easily be used to power long lengths of powerful LED tape.
When used with compatible switches and remotes, this driver can also smoothly dim your light displays, letting you select your perfect ambience for your room.
A built-in active PFC function ensures your driver is as efficient as possible. It even features short circuit, overload, over temperature and over current protections for extra peace of mind.
The IP66 rating means his driver can be used safely with outdoor displays, as it’s protected from dust as well as low pressure water jets from all directions.
There are absolutely loads of reasons to make sure you’ve switched over to LEDs throughout your home, even if you need to purchase drivers to make sure they work. We’ve picked out three of the best reasons to swap.
Firstly, LEDs use significantly less energy compared to their counterparts (90% less compared to an incandescent bulb). That means they cost very little to run, but it also massively reduces their environmental impact.
Secondly, LEDs are a lot more flexible compared to older bulbs. This is why you can get stunning LED strip lights. LED chips can be compact, and can produce light in a range of colours and brightness levels with a minimum of fuss.
Thirdly, LEDs last a really long time, with most of our strip tapes rated for 50,000 hours. That’s nearly two decades of use in the right conditions.
If 200W is a bit excessive for your needs, the DIMI range has numerous other maximum wattage options to choose from, including the much smaller DIMI Ultra 30W Dimmable Constant Voltage Driver. You could also choose the very powerful DIMI Ultra 360W Dimmable Constant Voltage Driver.
If instead you want a bit more customisation and control, then our EasiLight 150W RGB + CCT Dimming LED Driver (Wi-Fi + 2.4G) is a popular choice, as it ensures your displays can be controlled through your Wi-Fi signal.
If you decide for any reason that you would like to return your LED driver, you should know that you are fully entitled to a refund or exchange within 14 days of purchase, protecting your rights as a consumer.
You also have a 3-year warranty, covering you for any problems you might run into further down the line.
For any other enquiries you might have about this driver, whether that’s installation advice, trade prices or other product please feel free to get in touch. You can send us an email at cs@wled.co.uk, or you can ring us on 0116 321 4120.
Call us on 0116 321 4120, Mon - Fri: 8:30am - 5pm
For sales and ordering, email sales@wled.co.ukFor troubleshooting, returns or any other product queries, email cs@wled.co.uk.
Contact Us
