Retail Price
£105.19
The EasiLight 150W Single Color Dimming LED Driver (WiFi+2.4G) gives you amazing levels of control over your LED strip light displays, letting you tweak them from your phone, remote or even your smart home assistant.
This particular EasiLight driver is designed for use with single colour strips. It will enable stepless dimming in addition to its range of control options, letting you adjust the ambience of your space on the fly.
You must ensure that you don’t exceed the maximum load of this driver. We recommend leaving a 10% margin for error when calculating the maximum wattage of your light display, so with this particular driver you should ensure your strip lights don’t use more than 135W.
As an example, you could comfortably use 10m of our 9.6W tape and still have watts to spare.
These drivers are built with LED strip lights in mind, which are an amazing source of light for any home. They’re compact, flexible and relatively simple to install on all kinds of unusual surfaces thanks to their adhesive backing. But there are loads of other reasons to use LED lights.
As our calculations above show, LEDs use a fraction of the power of other lights while being just as bright. That means you get loads of stylish light while reducing your bills and being a lot kinder to the environment.
LEDs also have very impressive lifespans, with many of our strip lights rated for 50,000 hours. That’s typically lifespan of around 10 years.
This driver will ensure you can connect your strip lights to your Wi-Fi, but if you’d like an analogue remote to control your lights then the EasiLight 4 Zone Single Colour Smart Panel Remote Controller is a great option.
If you haven’t yet purchased any strip tape, then you’ll need something like the Spectric Single Colour LED Strip Lights (30 x 5050 SMD, 7.2W, 510 Lumens) to get started. There’s no point using RGB or RGBW tape with this driver, as you won’t be able to interact with their colourful chips. You’d want to use the EasiLight 150W RGBW Dimming LED Driver (Wi-Fi + 2.4G) instead.
All EasiLight products are covered by a robust two-year warranty policy, with no forms for you to fill out.
We also offer a 14-day returns period, so if you’re unhappy with your purchase for any reason, you can send it back to us for a no fuss return. Do note that some products may be special-order items, which means they may be subject to a 15% restocking fee upon return.
Not sure where to start? Our team is on hand to provide you with all the guidance you need to get your project underway. Just give us a call on 0116 321 4120 or send us an email. We can talk you through everything you need to know!
The EasiLight 150W driver has been a game-changer for my home lighting system. I needed a high-capacity driver for my new LED strips, and this one exceeded my expectations. The installation process was relatively straightforward, with clear instructions that made wiring easy. The Wi-Fi setup was a bit finicky at first, but once I got it connected, it’s been working flawlessly.
Great driver for larger setups. Took a bit to connect to Wi-Fi, but works well now.
The EasiLight 150W Single Color Dimming LED Driver (WiFi+2.4G) gives you amazing levels of control over your LED strip light displays, letting you tweak them from your phone, remote or even your smart home assistant.
This particular EasiLight driver is designed for use with single colour strips. It will enable stepless dimming in addition to its range of control options, letting you adjust the ambience of your space on the fly.
You must ensure that you don’t exceed the maximum load of this driver. We recommend leaving a 10% margin for error when calculating the maximum wattage of your light display, so with this particular driver you should ensure your strip lights don’t use more than 135W.
As an example, you could comfortably use 10m of our 9.6W tape and still have watts to spare.
These drivers are built with LED strip lights in mind, which are an amazing source of light for any home. They’re compact, flexible and relatively simple to install on all kinds of unusual surfaces thanks to their adhesive backing. But there are loads of other reasons to use LED lights.
As our calculations above show, LEDs use a fraction of the power of other lights while being just as bright. That means you get loads of stylish light while reducing your bills and being a lot kinder to the environment.
LEDs also have very impressive lifespans, with many of our strip lights rated for 50,000 hours. That’s typically lifespan of around 10 years.
This driver will ensure you can connect your strip lights to your Wi-Fi, but if you’d like an analogue remote to control your lights then the EasiLight 4 Zone Single Colour Smart Panel Remote Controller is a great option.
If you haven’t yet purchased any strip tape, then you’ll need something like the Spectric Single Colour LED Strip Lights (30 x 5050 SMD, 7.2W, 510 Lumens) to get started. There’s no point using RGB or RGBW tape with this driver, as you won’t be able to interact with their colourful chips. You’d want to use the EasiLight 150W RGBW Dimming LED Driver (Wi-Fi + 2.4G) instead.
All EasiLight products are covered by a robust two-year warranty policy, with no forms for you to fill out.
We also offer a 14-day returns period, so if you’re unhappy with your purchase for any reason, you can send it back to us for a no fuss return. Do note that some products may be special-order items, which means they may be subject to a 15% restocking fee upon return.
Not sure where to start? Our team is on hand to provide you with all the guidance you need to get your project underway. Just give us a call on 0116 321 4120 or send us an email. We can talk you through everything you need to know!
(12)
(11)
(12)
(5)
Call us on 0116 321 4120, Mon - Fri: 8:30am - 5pm
For sales and ordering, email sales@wled.co.ukFor troubleshooting, returns or any other product queries, email cs@wled.co.uk.
Contact Us