LED pixel tape is already an impressive piece of kit, with so many effects. You’ll want to get the best out of them though, and our LED Pixel Tape Controller is a sure way to do that.
Brought to you by Mirrorstone Lighting, it control things like colour, mode and speed – yet these are just a few of up to 133 different effects.
Once hooked up, it can control up to 49.5m of our LED pixel tape.
This gives you the option of linking multiple controllers using a CAT5 cable – theoretically letting you use as much pixel tape as you want.
It can take both 12V and 24V inputs, and has a maximum load of 72W or 144W respectively, dependent on the input voltage.
It’s compact at 130 x 70 x 25mm, and can be hidden away thanks to the RF remote supplied with it. It uses radio frequency so there doesn’t have to be a direct line of sight between the receiver and remote. The 20m range ensures plenty of flexibility when you do use it.
Completing The Setup
As mentioned above, this LED controller is designed for use exclusively with our RGB LED Pixel Tape.
It’s a fantastic high end product, using just 7.2W to power a maximum brightness of 510 lumens. An equivalent incandescent would use 50W just to get to the same level of light.
With a 120o beam angle and a huge 70,000 hours of life, it’s a great long term purchase that you’ll get in excess of 20 years of use out of.
It’s so good in fact, that even Samsung used our very own pixel tape during the launch of their Galaxy Tablet and Gear in London back in 2013.
Not only will this help your pixel tape look even better than it already does, it will also help extend the lifespan, as the aluminium construction dissipates any heat generated by the strip light.
You see, LEDs are far more energy efficient than conventional halogens. They only lose around 10% of their energy to heat wastage, whereas incandescent bulbs lose up to 80%. This is a massive difference that has a number of beneficial outcomes.
Firstly, it means that LEDs use a lot less energy, resulting in considerably cheaper electricity bills for you.
Secondly, the lack of heat wear and tear on the light helps it live longer – which explains how our pixel tape has such an astonishingly long lifespan. This means you’ll spend a lot less on replacement bulbs.
This also makes LEDs a lot safer to use too, as the lower operating temperature drastically reduces the risk of fire, and you won’t burn your skin by touching a hot light either.
That’s not the only way you can save money too, with free shipping on this pixel tape controller/amplifier, you get instant savings.
You could yet save more through our special discount codes – up to 20% off selected items including our featured controller.
Protecting Your Purchase
If you’re not happy for any reason with your pixel tape controller/amplifier, you’re welcome to bring it back during our 28 day home trial period for a full refund or exchange.
You also get a 2 year replacement warranty courtesy of Mirrorstone themselves, covering you in the longer term.
We have a team of experts on hand, ready to answer any further questions you might have about this strip light controller/amplifier, other LED controllers & power supplies that we sell, installations, wholesale enquiries or anything else – you just need to get in touch.
You can give us a call and speak to a member of our customer services team on 0116 321 4120, or alternatively you can send an email to cs@wled.co.uk.
LED pixel tape is already an impressive piece of kit, with so many effects. You’ll want to get the best out of them though, and our LED Pixel Tape Controller is a sure way to do that.
Brought to you by Mirrorstone Lighting, it control things like colour, mode and speed – yet these are just a few of up to 133 different effects.
Once hooked up, it can control up to 49.5m of our LED pixel tape.
This gives you the option of linking multiple controllers using a CAT5 cable – theoretically letting you use as much pixel tape as you want.
It can take both 12V and 24V inputs, and has a maximum load of 72W or 144W respectively, dependent on the input voltage.
It’s compact at 130 x 70 x 25mm, and can be hidden away thanks to the RF remote supplied with it. It uses radio frequency so there doesn’t have to be a direct line of sight between the receiver and remote. The 20m range ensures plenty of flexibility when you do use it.
Completing The Setup
As mentioned above, this LED controller is designed for use exclusively with our RGB LED Pixel Tape.
It’s a fantastic high end product, using just 7.2W to power a maximum brightness of 510 lumens. An equivalent incandescent would use 50W just to get to the same level of light.
With a 120o beam angle and a huge 70,000 hours of life, it’s a great long term purchase that you’ll get in excess of 20 years of use out of.
It’s so good in fact, that even Samsung used our very own pixel tape during the launch of their Galaxy Tablet and Gear in London back in 2013.
Not only will this help your pixel tape look even better than it already does, it will also help extend the lifespan, as the aluminium construction dissipates any heat generated by the strip light.
You see, LEDs are far more energy efficient than conventional halogens. They only lose around 10% of their energy to heat wastage, whereas incandescent bulbs lose up to 80%. This is a massive difference that has a number of beneficial outcomes.
Firstly, it means that LEDs use a lot less energy, resulting in considerably cheaper electricity bills for you.
Secondly, the lack of heat wear and tear on the light helps it live longer – which explains how our pixel tape has such an astonishingly long lifespan. This means you’ll spend a lot less on replacement bulbs.
This also makes LEDs a lot safer to use too, as the lower operating temperature drastically reduces the risk of fire, and you won’t burn your skin by touching a hot light either.
That’s not the only way you can save money too, with free shipping on this pixel tape controller/amplifier, you get instant savings.
You could yet save more through our special discount codes – up to 20% off selected items including our featured controller.
Protecting Your Purchase
If you’re not happy for any reason with your pixel tape controller/amplifier, you’re welcome to bring it back during our 28 day home trial period for a full refund or exchange.
You also get a 2 year replacement warranty courtesy of Mirrorstone themselves, covering you in the longer term.
We have a team of experts on hand, ready to answer any further questions you might have about this strip light controller/amplifier, other LED controllers & power supplies that we sell, installations, wholesale enquiries or anything else – you just need to get in touch.
You can give us a call and speak to a member of our customer services team on 0116 321 4120, or alternatively you can send an email to cs@wled.co.uk.
There’s so much untapped potential in our RGB LED Pixel Tape. So much so, that it requires quite a special product to extract the most out of it. Something above the ordinary. That’s where our 16 Key...
It’s never been easier to embrace your creative side – our 1m RGB LED Pixel Tape Kit has everything you need to add some sparkle wherever you want.Included in the package from Mirrorstone is a 240V...
Add some show-stopping wow factor to your home with the LED Stair Light Controller. This handy little device comes equipped with two PIR motion sensors, and is
14.4W 360° Bendable 24v LED Tape (5m)This LED Tape comes with a 470mm tail at the end with 2-core cable. It's available as a 5m length, and cannot be cut or soldered to a length shorter than supplied.
