

Brand: | Mirrorstone |
Certification: | CE, RoHS |
Input Voltage: | 100-240V~ 50/60Hz |
IP Rating: | IP67 |
Length(mm): | 204mm |
Maximum Load: | 150W |
Output Voltage: | 24V |
Height (mm): | 34.6mm |
Warranty: | 1 Year |
Width (mm): | 73mm |
Dimmability: | Dimmable |
Power Method: | Hard-Wired |
The EasiLight 150W Single Color Dimming LED Driver (WiFi+2.4G) gives you amazing levels of control over your LED strip light displays, letting you tweak them from your phone, remote or even your smart home assistant.
This particular EasiLight driver is designed for use with single colour strips. It will enable stepless dimming in addition to its range of control options, letting you adjust the ambience of your space on the fly.
You must ensure that you don’t exceed the maximum load of this driver. We recommend leaving a 10% margin for error when calculating the maximum wattage of your light display, so with this particular driver you should ensure your strip lights don’t use more than 135W.
As an example, you could comfortably use 10m of our 9.6W tape and still have watts to spare.
These drivers are built with LED strip lights in mind, which are an amazing source of light for any home. They’re compact, flexible and relatively simple to install on all kinds of unusual surfaces thanks to their adhesive backing. But there are loads of other reasons to use LED lights.
As our calculations above show, LEDs use a fraction of the power of other lights while being just as bright. That means you get loads of stylish light while reducing your bills and being a lot kinder to the environment.
LEDs also have very impressive lifespans, with many of our strip lights rated for 50,000 hours. That’s typically lifespan of around 10 years.
This driver will ensure you can connect your strip lights to your Wi-Fi, but if you’d like an analogue remote to control your lights then the EasiLight 4 Zone Single Colour Smart Panel Remote Controller is a great option.
If you haven’t yet purchased any strip tape, then you’ll need something like the Spectric Single Colour LED Strip Lights (30 x 5050 SMD, 7.2W, 510 Lumens) to get started. There’s no point using RGB or RGBW tape with this driver, as you won’t be able to interact with their colourful chips. You’d want to use the EasiLight 150W RGBW Dimming LED Driver (Wi-Fi + 2.4G) instead.
All EasiLight products are covered by a robust two-year warranty policy, with no forms for you to fill out.
We also offer a 14-day returns period, so if you’re unhappy with your purchase for any reason, you can send it back to us for a no fuss return. Do note that some products may be special-order items, which means they may be subject to a 15% restocking fee upon return.
Not sure where to start? Our team is on hand to provide you with all the guidance you need to get your project underway. Just give us a call on 0116 321 4120 or send us an email. We can talk you through everything you need to know!
Worth every penny!
The app interface is easy to navigate, and the dimming control is precise. The driver itself feels sturdy and well-made. My only issue was with the initial Wi-Fi setup; it was a bit more involved than I anticipated. However, now that it’s up and running, it’s performing reliably. This driver is a good choice for those needing a powerful, smart solution for their LED lighting needs.
I recently installed the EasiLight 150W LED driver for a new lighting project, and it’s been a solid performer. The driver handles the power needs for my large LED setup without any issues. The dimming function is smooth and provides good control over light levels. The Wi-Fi connectivity is a nice feature, though I had a bit of trouble getting it set up initially. I had to fiddle with my router settings a bit to get a stable connection. Once the connection was established, controlling the lights through the app has been seamless. The app is intuitive and makes it easy to adjust brightness or create lighting schedules. The build quality of the driver feels robust, and it’s been reliable so far.