Retail Price
£9.02
Please note that when purchasing this MR16 Downlight, you will need an additional driver of adequate load for your bulb that can step mains 240V down to 12V.
This downlight comes with a GU10 lamp holder as standard, and is supplied with an MR16 lamp holder separately, allowing you to use MR16 bulbs.
Coming in a flawless polished brass finish, the UltraSpot+ Ignis Plus Fire Rated Downlight MR16 Fixed Brass makes your ceilings a focal point and provides an exquisite golden finish.
As it is a standard size fire rated downlight, a whole host of low voltage spotlights can fit into the fitting, including the whole range of Mirrorstone MR16 LED spotlights. By installing these LEDs you can make savings of up to 90% as well as benefitting from a whole range of other benefits.
For example, this reduced energy requirement doesn't just save you money, but it is also greatly beneficial to the environment and makes great strides in helping to preserve the planet. On top of this exceptionally small energy requirement, LEDs posses other advantages that benefit the environment such when they have been fully used up, they can be recycled.
Unlike CFL bulbs, LEDs contain no noxious or harmful substances such as mercury meaning that they have a reduced risk to you and this is one of the reasons for their recyclability.
LEDs have also been designed not to flicker, something that is annoying amongst all light bulbs. This ability of not flickering means reduced headaches, coming as one of the many health benefits of LED Lights.
The new and improved UltraSpot range delivers incredible-looking downlights with a difference. They include updated intumescent materials to lengthen the amount of time it takes for fire to spread. They have a tighter design with better heat sink technology in order to increase energy-efficiency.
All our MR16 spotlights can fit into the Fixed Fire Rated Downlight - Brass - Diecast meaning you have a range of different effects available at your disposal. Not only this, but each unit has a maximum load of 50W on non-flammable surfaces and 35W on flammable surfaces which gives you the freedom to install any MR16 LED downlight without the fear of over loading the fitting.
Our recommendation on which spotlight you should use is the MR16 6w LED COB thanks to its brilliant 400 lumen output, it matches the light output of a 50W halogen spotlight. Not only this, but it also has a 60° beam angle, helping it become one of the closest replications of halogen spotlights from an LED.
We also have other bulbs with brighter light outputs and sharper beam angles if you'd rather something different.
Also, being an MR16 spotlight you will require a transformer for them to work, we have a 6w LED driver available to do this, as it is capable of powering any of our MR16 downlights. If you'd rather have them dimmable, this is also possible with a dimmable LED driver and a Trailing edge dimmer switch.
Like all of the fire rated MR16 downlights and fire rated GU10 downlights that we sell, the MR16 Fixed Fire Rated Downlight - Brass - Diecast comes with a manufacturer's warranty of 1 year. This covers you against any premature failures within the first year.
Not only do you get this brilliant warranty, but you also have the chance to test your MR16 light fittings with our 14 day home trial, meaning you can make a fully informed decision on what you have. If you fell you do not like the finish, the size isn't right or even the colour of the bulb isn't what you'd like then let us know and we can change it over to something else.
If you have any more questions about the MR16 Fixed Fire Rated Downlight or any other downlights we have available, then please do not hesitate to get in touch with us by calling 0116 321 4120 or send an e-mail to cs@wled.co.uk.
We have also recently opened a trade site. Apply for an account now and make your savings now!
Please note that when purchasing this MR16 Downlight, you will need an additional driver of adequate load for your bulb that can step mains 240V down to 12V.
This downlight comes with a GU10 lamp holder as standard, and is supplied with an MR16 lamp holder separately, allowing you to use MR16 bulbs.
Coming in a flawless polished brass finish, the UltraSpot+ Ignis Plus Fire Rated Downlight MR16 Fixed Brass makes your ceilings a focal point and provides an exquisite golden finish.
As it is a standard size fire rated downlight, a whole host of low voltage spotlights can fit into the fitting, including the whole range of Mirrorstone MR16 LED spotlights. By installing these LEDs you can make savings of up to 90% as well as benefitting from a whole range of other benefits.
For example, this reduced energy requirement doesn't just save you money, but it is also greatly beneficial to the environment and makes great strides in helping to preserve the planet. On top of this exceptionally small energy requirement, LEDs posses other advantages that benefit the environment such when they have been fully used up, they can be recycled.
Unlike CFL bulbs, LEDs contain no noxious or harmful substances such as mercury meaning that they have a reduced risk to you and this is one of the reasons for their recyclability.
LEDs have also been designed not to flicker, something that is annoying amongst all light bulbs. This ability of not flickering means reduced headaches, coming as one of the many health benefits of LED Lights.
The new and improved UltraSpot range delivers incredible-looking downlights with a difference. They include updated intumescent materials to lengthen the amount of time it takes for fire to spread. They have a tighter design with better heat sink technology in order to increase energy-efficiency.
All our MR16 spotlights can fit into the Fixed Fire Rated Downlight - Brass - Diecast meaning you have a range of different effects available at your disposal. Not only this, but each unit has a maximum load of 50W on non-flammable surfaces and 35W on flammable surfaces which gives you the freedom to install any MR16 LED downlight without the fear of over loading the fitting.
Our recommendation on which spotlight you should use is the MR16 6w LED COB thanks to its brilliant 400 lumen output, it matches the light output of a 50W halogen spotlight. Not only this, but it also has a 60° beam angle, helping it become one of the closest replications of halogen spotlights from an LED.
We also have other bulbs with brighter light outputs and sharper beam angles if you'd rather something different.
Also, being an MR16 spotlight you will require a transformer for them to work, we have a 6w LED driver available to do this, as it is capable of powering any of our MR16 downlights. If you'd rather have them dimmable, this is also possible with a dimmable LED driver and a Trailing edge dimmer switch.
Like all of the fire rated MR16 downlights and fire rated GU10 downlights that we sell, the MR16 Fixed Fire Rated Downlight - Brass - Diecast comes with a manufacturer's warranty of 1 year. This covers you against any premature failures within the first year.
Not only do you get this brilliant warranty, but you also have the chance to test your MR16 light fittings with our 14 day home trial, meaning you can make a fully informed decision on what you have. If you fell you do not like the finish, the size isn't right or even the colour of the bulb isn't what you'd like then let us know and we can change it over to something else.
If you have any more questions about the MR16 Fixed Fire Rated Downlight or any other downlights we have available, then please do not hesitate to get in touch with us by calling 0116 321 4120 or send an e-mail to cs@wled.co.uk.
We have also recently opened a trade site. Apply for an account now and make your savings now!
Call us on 0116 321 4120, Mon - Fri: 8:30am - 5pm
For sales and ordering, email sales@wled.co.ukFor troubleshooting, returns or any other product queries, email cs@wled.co.uk.
Contact Us