Retail Price
£15.83
Download the spec sheet for the OptimX 24W 12V AC/DC Power Adapter here.
Our Mirrorstone OptimX 24W 12V AC/DC Power Adapter makes it easy to power your 12V single colour & RGB strip lights and your LED light bars.
It plugs straight into your mains via standard UK 3-pin plug, and into your LED lights through a 2.5mm connector – and that’s it!
Once plugged in, it takes the mains 240V and outputs a more LED friendly 12V.
The maximum load of 24W makes it perfect for relatively short lengths of strip light or low power light bars.
Head on over to our discount codes page to see if you can get up to 20% off selected items – including this power adapter! Check back regularly for our latest deals.
As mentioned before, this OptimX 24W AC/DC Power Adapter will work with 12V single colour & RGB strips and light bars. Amongst all these options, we’ve got a couple of recommendations for you.
The first is our 7.2W RGB LED Strip Lights. They have a maximum brightness of 510 lumens, yet they only use 7.2W/m of electricity. As a result, you can safely run up to 3m of this tape using our featured 12V AC/DC power adapter, giving you plenty of length to work with.
We would also recommend using our 8.5W 0.5M LED Light Bar. It’s slightly more power hungry than our suggested strips at 8.5W of power.
It does shine though with 450 lumens of light. Throw in IP44 rating and a 120o beam angle, and you have a great all round light that’s brilliant for general illumination.
Some flexibility is afforded to you through the choice of colour temperatures too.
If you’re running strip lights and need a slightly higher max load, you should consider something like our 60W 12V AC/DC Power Adapter.
The only differing spec is the load – it’s higher at 60W. If we revisit our recommended RGB strips but use this higher capacity adapter now, we’ll find that we can run a maximum of 7m now.
Make sure you look through our whole range of LED power supplies where you can find other power adapters, standard, waterproof, dimmable, 1-10V and Dali LED drivers so you can ensure you’re getting the correct load for what you need.
You’re welcome to return your OptimX 24W 12V AC/DC Power Adapter during our 14 day cancellation period if you no longer want it – maybe you’re not happy or you’ve simply changed your mind. We just need the product back in re-sellable condition.
You’re also covered by Mirrorstone’s 1 year replacement warranty for any unlikely faults that may occur in the longer term.
Get in touch by calling us on 0116 321 4120, or by sending us an email to cs@wled.co.uk if you have any further questions about this 24W 12V AC/DC Power Adapter, becoming a trade customer or anything else you’ve seen on our site.
Download the spec sheet for the OptimX 24W 12V AC/DC Power Adapter here.
Our Mirrorstone OptimX 24W 12V AC/DC Power Adapter makes it easy to power your 12V single colour & RGB strip lights and your LED light bars.
It plugs straight into your mains via standard UK 3-pin plug, and into your LED lights through a 2.5mm connector – and that’s it!
Once plugged in, it takes the mains 240V and outputs a more LED friendly 12V.
The maximum load of 24W makes it perfect for relatively short lengths of strip light or low power light bars.
Head on over to our discount codes page to see if you can get up to 20% off selected items – including this power adapter! Check back regularly for our latest deals.
As mentioned before, this OptimX 24W AC/DC Power Adapter will work with 12V single colour & RGB strips and light bars. Amongst all these options, we’ve got a couple of recommendations for you.
The first is our 7.2W RGB LED Strip Lights. They have a maximum brightness of 510 lumens, yet they only use 7.2W/m of electricity. As a result, you can safely run up to 3m of this tape using our featured 12V AC/DC power adapter, giving you plenty of length to work with.
We would also recommend using our 8.5W 0.5M LED Light Bar. It’s slightly more power hungry than our suggested strips at 8.5W of power.
It does shine though with 450 lumens of light. Throw in IP44 rating and a 120o beam angle, and you have a great all round light that’s brilliant for general illumination.
Some flexibility is afforded to you through the choice of colour temperatures too.
If you’re running strip lights and need a slightly higher max load, you should consider something like our 60W 12V AC/DC Power Adapter.
The only differing spec is the load – it’s higher at 60W. If we revisit our recommended RGB strips but use this higher capacity adapter now, we’ll find that we can run a maximum of 7m now.
Make sure you look through our whole range of LED power supplies where you can find other power adapters, standard, waterproof, dimmable, 1-10V and Dali LED drivers so you can ensure you’re getting the correct load for what you need.
You’re welcome to return your OptimX 24W 12V AC/DC Power Adapter during our 14 day cancellation period if you no longer want it – maybe you’re not happy or you’ve simply changed your mind. We just need the product back in re-sellable condition.
You’re also covered by Mirrorstone’s 1 year replacement warranty for any unlikely faults that may occur in the longer term.
Get in touch by calling us on 0116 321 4120, or by sending us an email to cs@wled.co.uk if you have any further questions about this 24W 12V AC/DC Power Adapter, becoming a trade customer or anything else you’ve seen on our site.
Call us on 0116 321 4120, Mon - Fri: 8:30am - 5pm
For sales and ordering, email sales@wled.co.ukFor troubleshooting, returns or any other product queries, email cs@wled.co.uk.
Contact Us
